Recently the OpenWrt One was announced for sale. This is a wireless access point/router powered by Banana Pi and designed by the OpenWrt project. Additionally, $10 from every device sold go to the Software freedom conservency to help fund OpenWrt efforts.

The device was available on aliexpress, which is a bit weird for us here in the west, but I had no trouble ordering it there and the cost was pretty reasonable. It arrived last week.

The design is pretty nice. There's a NAND/NOR switch. Normal operation the switch is in NAND setting. If something goes wrong, you can hold down the button on the front while powering on and you shoule get a rescue image. If somehow even that image doesn't work, you can switch the switch to NOR mode and it will boot a full recovery from a USB drive. So, pretty unbrickable.

Initial setup was easy. Just screw on the 3 antenna, connect ethernet and usb-c power and everything came up fine. I was a bit confused on what password to use, but then I realized just hitting return would take me to the 'hey, please set a password' screen. A small note might be nice there.

Since I was using OpenWrt on my existing linksys e8450 it was pretty simple to configure the new accesspoint in a similar manner. Upgrade was pretty easy as soon as I realized that I needed to pick 24.10.0-rcN or snapshot on the firmware selector as there are no stable images for the One yet.

I then spent a lot of time playing with the channel_analysis page. This page scans for other accesspoints and shows you what channels are in heavy use or open. On 5ghz, there was basically nothing else, so no problems there. However, on 2.4Ghz there were an astonishing number of aps. I live out pretty far from town, but there's still a LOT of them. Of course some were coming from 'inside the house' like some roku devices or the like. Finally I decided channel 9 was the best bet.

switching things was a bit of a dance. I connected to the openwrt wireless network, logged in and changed the wired network, then powered off the old ap and swapped the network cable to the new one. Then, rejoined the wireless and changed the name/password so all the existing devices would just keep working.

I do notice faster connection rates on my main laptop at least. The accesspoint is also really responsive either via web (luci) or ssh. I may look at adding some more duties to this device over time. It does have a nvme slot so I could do some caching or perhaps some other setup. I also want to play with the usb-c console port and perhaps at some point upgrade my home switch so I can power it via PoE.

All in all a pretty great device. It seems to currently be sold out, but if you are looking for a nice, unbrickable ap that is very open source, this might just be the ticket for you.