Network security is becoming more and more important as people spend more and more time connected. Compromising network security is often much easier than physical or local, and is much more common.
There are a number of good tools to assist with network security, and more and more of them are shipping with Linux distributions.
One of the most common ways intruders gain access to more systems on your network is by employing a packet sniffer on a already compromised host. This "sniffer" just listens on the Ethernet port for things like "Password" and "Login" and "su" in the packet stream and then logs the traffic after that. This way, attackers gain passwords for systems they are not even attempting to break into. Clear text passwords are very vulnerable to this attack.
EXAMPLE: host A has been compromised. Attacker installs a sniffer. Sniffer picks up admin logging into host B from Host C. It gets the admins personal password as they login to B. Then, the admin does a 'su' to fix a problem. They now have the root password for Host B. Later the admin lets someone telnet from his account to host Z on another site. Now the attacker has a password/login on host Z.
In this day and age, the attacker doesn't even need to compromise a system to do this, they could also bring a laptop or pc into a building and tap into your net.
Using ssh or other encrypted password methods thwarts this attack. Things like APOP for pop accounts also prevents this attack. (Normal pop logins are very vulnerable to this, as is anything that sends clear text passwords over the wire.)
As soon as you put your Linux system on ANY network the first thing to look at is what services you need to offer. Services that you do not need to offer should be disabled so that you have one less thing to worry about and attackers have one less place to look for a hole.
There are a number of ways to disable services under Linux. You can look at your /etc/inetd.conf file and see what services are being offered by your inetd. Disable any that you do not need by commenting them out (# at the beginning of the line), and then sending your inetd process a SIGHUP.
You can also remove (or comment out) services in your /etc/services file. This will mean that local clients will also be unable to find the service (ie, if you remove ftp, and try and ftp to a remote site from that machine it will fail with an unknown service message). It's usually not worth the trouble to remove services, since it provides no additional security. If a local person wanted to use ftp even tho you had commented it out, they would make their own client that use the common ftp port and would still work fine.
Some of the services you will want to leave enabled are:
If you know you are not going to use some particular package, you can also delete it entirely. rpm -e under the Red Hat distribution will erase an entire package. Under debian dpkg likely does the same thing.
Additionally, you really want to disable the rsh/rlogin/rcp utilities, including login (used by rlogin), shell (used by rcp), and exec (used by rsh) from being started in /etc/inetd.conf. These protocols are extremely insecure and have been the cause of exploits in the past.
You should check your /etc/rc.d/rcN.d, where N is your systems run level and see if any of the servers started in that directory are not needed. The files in /etc/rc.d/rcN.d are actually symbolic links to the directory /etc/rc.d/init.d. Renaming the files in the init.d directory has the effect of disabling all the symbolic links in /etc/rc.d/rcN.d. If you only wish to disable a service for a particular runlevel, rename the appropriate file with a lower-case 's', instead of the upper-case 'S', such as in S45dhcpd.
If you have BSD style rc files, you will want to check /etc/rc* for programs you don't need.
Most Linux distributions ship with tcp_wrappers "wrapping" all your tcp services. A tcp_wrapper (tcpd) is invoked from inetd instead of the real server. tcpd then checks the host that is requesting the service and either executes the real server or denies access from that host. tcpd allows you to restrict access to your tcp services. You should make a /etc/hosts.allow and add in only those hosts that need to have access to your machines services.
If you are a home dialup user, we suggest you deny ALL. tcpd also logs failed attempts to access services, so this can give you an idea that you are under attack. If you add new services, you should be sure to configure it to use tcp_wrappers TCP based. For example, a normal dial-up user can prevent outsiders from connecting to your machine, yet still have the ability to retrieve mail, and make network connections to the Internet. To do this, you might add the following to your /etc/hosts.allow:
ALL: 127.
And of course /etc/hosts.deny would contain:
ALL: ALL
which will prevent external connections to your machine, yet still allow you from the inside to connect to servers on the Internet.
Keeping up-to-date DNS information about all hosts on your network can help to increase security. In the event of an unauthorized host becomes connected to your network, you can recognize it by its lack of a DNS entry. Many services can be configured to not accept connections from hosts that do not have valid DNS entries.
identd is a small program that typically runs out of your inetd. It keeps track of what user is running what tcp service, and then reports this to whoever requests it.
Many people misunderstand the usefulness of identd, and so disable it or block all off site requests for it. identd is not there to help out remote sites. There is no way of knowing if the data you get from the remote identd is correct or not. There is no authentication in identd requests.
Why would you want to run it then? Because it helps _you_ out, and is another data-point in tracking. If your identd is un compromised, then you know it's telling remote sites the user-name or uid of people using tcp services. If the admin at a remote site comes back to you and tells you user so and so was trying to hack into their site, you can easily take action against that user. If you are not running identd, you will have to look at lots and lots of logs, figure out who was on at the time, and in general take a lot more time to track down the user.
The identd that ships with most distributions is more configurable than many people think. You can disable identd for specific users (they can make a .noident file), you can log all identd requests (I recommend it), you can even have identd return a uid instead of a user name or even NO-USER.
There are a number of different software packages out there that do port and service based scanning of machines or networks. SATAN and ISS are two of the more well known ones. This software connects to the target machine (or all the target machines on a network) on all the ports it can, and tries to determine what service is running there. Based on this information, you could find out the machine is vulnerable to a specific exploit on that server.
SATAN (Security Administrators Tool for Analyzing Networks) is a port scanner with a web interface. It can be configured to do light, medium, or strong checks on a machine or a network of machines. It's a good idea to get SATAN and scan your machine or network, and fix the problems it finds. Make sure you get the copy of SATAN from sun-site or a reputable FTP or web site. There was a Trojan copy of SATAN that was distributed out on the net. http://www.trouble.org/~zen/satan/satan.html
ISS (Internet Security Scanner) is another port based scanner. It is faster than Satan, and thus might be better for large networks. However, SATAN tends to provide more information.
Abacus-Sentry is a commercial port scanner from www.psionic.com. Look at it's home page on the web for more information. http://www.psionic.com
Detecting Port scans.
There are some tools designed to alert you to probes by Satan and ISS and other scanning software, However liberal use of tcp_wrappers and making sure to look over your log files regularly, you should be able to notice such probes. Even on the lowest setting, Satan still leaves traces in the logs on a stock Red Hat system.
One of the most important services you can provide is a mail server. Unfortunately, it is also one of the most vulnerable to attack, simply due to the number of tasks it must perform and the privileges it typically needs.
If you are using sendmail it is very important to keep up on current versions. Sendmail has a long long history of security exploits. Always make sure you are running the most recent version. http://www.sendmail.org
If you are tired of upgrading your version of sendmail every week, you might consider switching over to qmail. qmail was designed with security in mind from the ground up. It's fast and stable and secure. http://www.qmail.org
A Denial of service attack is one where the attacker tries to make some resource too busy to answer legitimate requests, or to deny legitimate users access to your machine.
Denial of service attacks have increased greatly in recent years. Some of the more popular and recent ones are listed below. Note that new ones show up all the time, so this is just a few examples. Read the Linux security lists and the bugtraq list and archives for more current information.
If you are ever under a ping flood attack, use a tool like tcpdump to determine where the packets are coming from (or appear to be coming from), then contact your provider with this information. Ping floods can most easily be stopped at the router level or by using a firewall.
NFS is a very widely used file sharing protocol. It allows servers running nfsd and mountd to "export" entire filesystems to other machines with nfs filesystem support builtin to their kernels (or some other client support if they are non Linux machines). Mountd keeps track of mounted filesystems in /etc/mtab, and can display them with 'showmount'.
Many sites use NFS to serve home directories to users, so that no matter what machine in the cluster they login to, they will have all their home files.
There is some small amount of "security" allowed in exporting filesystems. You can make your nfsd map the remote root user (uid=0) to the nobody user, denying them total access to the files exported. However, since individual users have access to their own (or at least the same uid) files, the remote superuser can login or su to their account and have total access to their files. This is only a small hindrance to an attacker that has access to mount your remote filesystems.
If you must use NFS, make sure you export to only those machines that you really need to export only. Never export your entire root directory, export only directories you need to export.
See the NFS HOWTO for more information on NFS: NFS HOWTO
Network Information service (formerly YP) is a means of distributing information to a group of machines. The NIS master holds the information tables and converts them into NIS map files. These maps are then served over the network, allowing NIS client machines to get login, password, home directory and shell information (all the information in a standard /etc/passwd file). This allows users to change their password once and have it take affect on all the machines in the NIS domain.
NIS is not at all secure. It was never meant to be. It was meant to be handy and usefull. Anyone that can guess the name of your NIS domain (anywhere on the net) can get a copy of your passwd file, and use crack and john the ripper against your users passwords. Also, it is possible to spoof NIS and do all sorts of nasty tricks. If you must use NIS, make sure you are aware of the dangers.
There is a much more secure replacement for NIS, called NIS+. Check out the NIS HOWTO for more information: http://sunsite.unc.edu/mdw/HOWTO/NIS-HOWTO.html
Firewalls are a means of restricting what information is allowed into and out of your local network. Typically the firewall host is connected to the Internet and your local lan, and the only access from your lan to the Internet is through the firewall. This way the firewall can control what passes back and forth from the Internet and your lan.
There are a number of types and methods of setting up firewalls. Linux machines make pretty good low cost firewalls. Firewall code can be built right into 2.0 and higher kernels. The ipfwadm user space tool allows you to change what types of network traffic you allow on the fly. You can also log particular types of network traffic.
Firewalls are a very usefull and important technique in securing your network. It is important to realize that you should never think that because you have a firewall, you don't need to secure the machines behind it. This is a fatal mistake. Check out the very good Firewall-HOWTO at your latest sunsite archive for more information on firewalls and Linux. http://sunsite.unc.edu/mdw/HOWTO/Firewall-HOWTO.html
More information can also be found in the IP-Masquerade mini-howto: http://sunsite.unc.edu/mdw/HOWTO/mini/IP-Masquerade.html
More information on ipfwadm (The tool that lets you change settings on your firewall, can be found at it's home page: http://www.xos.nl/linux/ipfwadm/